The most complete ironing clothes
1. Preparation work:
One steam iron, one ironing table, and one piece of thin cotton cloth.
2. Basic ironing principle:
Ironing principle: (1) First ironing the back side, then the front side; (2) First ironing the part, then the whole. The ironing order of the
is: sewing > squid > placket > pocket > back body > front body > rotator sleeve > collar. The ironing order of
The ironing order of trousers is: waist > trouser > trouser legs > trouser body. The ironing order of the shirt is: sewing > sleeves > collar > back body > small pleats > placket > front shoulders.
3. Ironing methods and techniques for sweaters, pants, shirts, necklines
1. Sweater ironing method:
Sweater, knitted materials, if you use an iron to burn it directly, it will destroy the elasticity of the tissue. At this time, it is best to use a steam iron to spray water on the wrinkles; if the wrinkles are not very bad, you can also hang it up and spray water directly on the wrinkles and wait for it to dry, and it will naturally smooth; another method is to hang it in the bathroom and use the hot steam from the bath to make it smooth.
2. Collar ironing tips: When ironing the neckline, be careful not to pull it apart and deform it. It is best to fix the shape and iron it. If there is a collar plate, do not burn the collar pleats to death. As long as it is still warm after burning, fold it with your hands while it is still warm, so that the collar plate will look more alive.
3. Ironing method for trousers:
The order is as follows: turn the pants over, lift the pocket, first press the near the crotch, followed by the pocket, the corner of the pants and the cloth sewing place, then burn the front, then the inside of the right foot, the outside of the right foot, the inside of the left foot, the inside of the left foot, and the outside of the left foot, and finally put the two pants together to modify it.
4. Shirt ironing method:
Collar: Flat the front and back sides of the collar, iron them from the tip of the collar to the middle, repeat the movement just now on the back of the collar, then fold the collar from the seam, iron it, shape it, and use the fingers of both hands to press the collar into an arc while it is hot, iron the middle part of the collar after folding, and the three-dimensional feeling of the collar will be immediately presented.
Cuffs: Close the front closure of the shirt, spread the backs of the backs on the ironing table, iron the backs of the sleeves separately and then iron the cuffs; finally turn over and iron the fronts of the sleeves.
Sleeve tube: Lay the sleeve tube flat on the ironing table, align it at the middle joint of the sleeve tube, and flatten the iron back and forth.
Front and back: Hold the top of the shirt placket with your left hand, and use the iron with your right hand to iron it from the hem to the shoulder. Be careful to lay it flat and iron it.
4. Tips for ironing clothes
1. It is best not to dry the clothes you want to iron. If the clothes are too dry, you should place them on a smooth board and spray water evenly before ironing, or lay a wet cloth on the clothes that wrung dry.
2. If there are small mold spots on the clothes, you can use vinegar water to wash it clean and then iron it.
3. Prepare a square pure cotton cloth as a pad. Because using an iron to iron the surface of the clothes will become shiny and white over time. You need to cover it with a piece of cotton cloth on it before ironing.
4. When ironing, iron the fabric along the lines of the clothes. If there are obliquely cut materials, the fabric should also be ironed along the lines.
5. Generally speaking, when ironing, the reverse side should be ironed first, then the front side; first the thicker ones, then the thin ones; first the nylon, then the cotton and linen.
6. Thin and thin materials such as chiffon yarn need to be ironed at a lower temperature. Do not use too much force when burning to avoid breaking.
7. If the wrinkles of the clothes are too deep and are not easy to iron, you can spray some diluted white vinegar on it and then burn it, which will easily be ironed without repeated ironing to damage the fabric.
8. When ironing women's clothes, you can spray a few drops of perfume first, and the clothes will emit a faint fragrance after ironing.
9. If the iron is not very smooth when used, use old cotton cloth to wrap some candle pieces and rub the bottom of the iron.
10. It is not advisable to pack or put it in the wardrobe immediately after ironing. It should be hung immediately to dissipate the hot flashes and keep it firm; reduce the possibility of mold and odor.
5. How to use the iron correctly:
1. When turning on the power supply to iron, pay attention to the ironing effect, the odor and color changes of the fabric (especially natural fiber fabric fabrics) and the power should be cut off immediately. When the temperature is not enough during the continuous ironing process, turn on the power again.
2. Steam irons are usually used for household irons. If they are polyester or silk, it is best to cover them with cotton to avoid burning the clothes.
3. If you are using a non-steam iron, if you want to protect your clothes, you can place a wet water cloth on the clothes to iron. Since the water needs to differentiate into steam, the temperature drops quickly. At this time, you need to slow down the ironing speed. You can first light and then heavy to make the water evaporate and diffuse evenly and the temperature distribution is evenly distributed.
4. When using a temperature-regulating electric iron, you should master the ironing temperature of various fiber files approved by the iron, because it is formulated based on the most basic safety factor of the fiber, and it is impossible to flatten clothes at all with this temperature. Therefore, during ironing, it is best to increase the fiber ironing temperature by another level, and if necessary, it can also be adjusted to a higher level.