Technical requirements for laminated glass
Technical requirements for laminated glass
Construction doors and windows anti-theft, bulletproof, explosion-proof lighting sheds, glass roof banks, automobiles, decoration and other underwater building products specifications.
Features: Soundproof glass for construction, sound insulation glass isolates ultraviolet bulletproof glass.
Purpose: lighting shed, apartment/hotel door and window zoo, a place where aquarium has special safety requirements.
Specification: Maximum size: 2440*5500 (mm) Minimum size: 250*250 (mm) Common glass thickness: 3-19 (mm) Common PVB film thickness: 0.38mm, 0.76mm, 1.14mm, 1.52mm.
Cleaning and Maintenance of laminated glass
How to maintain laminated glass? Glass is a kind of thing that is easy to stick to dust, so you should pay special attention to cleaning and maintenance and the density of the cleaning.
1. It is best to place laminated glass furniture in a relatively fixed place and do not move back and forth at will; place objects smoothly, and heavy objects should be placed at the bottom of the glass furniture to prevent the furniture from overturning due to unstable center of gravity. In addition, avoid moisture, stay away from stoves, and isolate it from chemical reagents such as acids and alkalis to prevent corrosion and deterioration.
2. During daily cleaning, just wipe it with a wet towel or newspaper. If stains occur, you can wipe it with a towel or warm vinegar. In addition, you can also use the glass cleaning agent currently sold on the market. Avoid cleaning with a solution with strong acidity and alkalinity. The surface of the glass is prone to frosting in winter, and you can use a cloth to dip it in concentrated salt water or white wine to wipe it, which is very effective.
3. Once the patterned frosted glass is dirty, you can use a toothbrush dipped in detergent and wipe it in circles along the pattern to remove it. In addition, you can also drip some kerosene on the glass or apply chalk ash and gypsum powder dipped in water on the glass to dry, and then wipe it with a clean cloth or cotton, so that the glass is both clean and bright.
4. Using plastic wrap and a wet cloth sprayed with detergent can also allow glass that is often covered with oily stains, "regain new life". First, spray the laminated glass with detergent and apply plastic wrap to soften the solidified oil stains. After ten minutes, tear off the plastic wrap and wipe it with a damp cloth. To keep the glass smooth and bright, you must clean it frequently. If there is handwriting on the glass, you can use an eraser to rub it with water and then wipe it with a wet cloth; if there is paint on the glass, you can use cotton to dip hot vinegar to wipe it; if there is cleaning dry cloth dipped in alcohol to wipe the glass, it can make it as bright as crystal.